Cerakote gun Coatings Chemical resistance compared to Duracoat, gun blueing, Parkerizing, Robar Np3, Black oxide and many other Chemicals.


Chemical resistance of Cerakote

The ability of cerakote H-146 to resist chemical attach was tested by dipping coated panels into a series of solvents to which the coating may be exposed during regular use and extreme conditions. The panels were placed in the solution and allowed to sit for 24 hours. Afterward , the samples were removed, analyzed and assigned a rank depending on the resistance to each specific chemical. the results of this test are shown in the table above.

The performance of the Cerakote gun coating H-146 was classified as excellent for 14 of the solvent tests. This indicates the coating was not affected following 24-hour immersion in the solvents. the coating also showed good resistance to Hci and experienced only slight change in texture after 24-hour immersion.


Solvent Resistance of Cerakote Gun Coatings






Motor Oil


Gun Cleaner


Lacquer Thinner


Mineral Spirits


Methyl Ethyl Ketone






Graffiti Remover


Brake Cleaner


Denatured Alcohol


Paint Stripper


5% HCl Solution






Copyright © 2020 Cerakote Gun Coatings, Gun Re-Finishing, DuraCoat Robar NP3 Phoenix AZ. All Rights Reserved.