ACOATING

  • Home

    Home

  • Colors

    Colors

  • Place Order

    Place Order

  • Gunsmith Services

    Gunsmith Services

  • FAQ's

    FAQ's

  • Galleries

    Galleries

  • Testimonials

    Testimonials

  • Contact

    Contact

  • PAYPAL

    PAYPAL

 

 

 

 

 

 

 

 

Cerakote Gun Coating Adhesion

 

Test Astm D3359

Adhesion (Astm D3359), Is a test method to analyze whether the coating has adhered to a metal substrate. Cerakote h-146 was applied to a set of steel panels and cross hatch pattern is made through the coating to the substrate. Pressure-sensitive tape is applied over the crosshatch cut and then the tape is smoothed infor place over the area of the incisions. The tap is then removed by pulling it off rapidly back over itself as close to an angle of 180 deg and the adhesion of the Cerakote gun coating to the steel is assessed on a 0B to 5B Scale (shown). Cerakote gun coating H-146 finished strong with a 5B Adhesion rating, the highest adhesion rating possible.

 

 

 

 

 

 

 

Copyright © 2024 Cerakote Gun Coatings, Gun Re-Finishing, DuraCoat Robar NP3 Phoenix AZ. All Rights Reserved.