GUNSMITH SERVICES (Licensed FFL, Professional Gunsmith)

Effective June 15, 2013
Prices subject to change without notice

Completion Time

Sight Installation 2 to 5 days (longer if machining is required)
General Repairs 10-15 days./ Machine work 30-60 days/ Plus Parts shipping times depend on vendors.
Coatings Average time for 2013, 10-15 Business days rarely over 30 days max. (some projects due to complexity, material retention etc. can take up to 60 days)

Minimum Charge:
Per Firearm $25 (no exceptions)
Shop Rate: $65 per hour
Per Hour $85 (for all custom gunsmith & machining services not listed)

Exclusions:
We reserve the right to refuse work deemed to be unsafe. We DO NOT remove or deactivate firearm safeties. If test firing a firearm is requested or required, the test fire is performed using commercially loaded factory ammunition at additional cost (Thanks for understanding). We DO NOT perform test fires with hand loaded ammunition or surplus military ammunition. Parts affixed with epoxy or high strength Loctite will incur an additional charge.

Shop Supplies:Moderate charges (5% of ticket) apply to cover disposable expenses required to perform,maintain,equipment,supplies, chemicals etc.

Pistol smith Services

General  
Function check / safety inspection (test fire not included).
$25
Function check / safety inspection and test fire (ammo additional)
$35
Ultra Clean (complete detail strip, ultrasonic clean, ultrasonic lube, parts inspection and reassemble)
$25
Test fire (ammo additional).
$45
Test fire and sight in (ammo additional).
$45

 

 
Glock Grip Enhancement  
Round off trigger guard
$35
High hand hold (removes material from the front strap where it joins the trigger guard)
$25
Texture magazine pad, each
$25
Texture /stipple complete grip
$55
   
Sight Installation (Sights & Metal Finishing not included)  
Install factory-fit sight set (no machining required, sights purchased here)
$25
Install factory-fit sight set (no machining required, customer supplied sights)
$35
Additional cost to install stake-on front sight (eg. 1911 G.I. style - no guarantee, dovetail mount recommended)
$35
Additional cost to machine out sight, if not removable conventionally (eg. Springfield XD)
$40
Machine slide for dovetail-fit front sight*/**
$65
Machine slide for Novak or Heinie rear sight*/**
$105
Machine slide for Bo-Mar rear sight*/**
$145
Install pinned revolver front sight*
$30
Install adjustable revolver rear sight blade*
$25
Drill & tap sight base hole, per hole*/**
$25
   
Pistol Safeties (Parts & Metal Finishing Not Included):  
Install gunsmith fit beaver tail grip safety - specify Ed Brown or Wilson type (requires fitting of safety and frame)*/** refinishing required.
$75
Install drop-in beaver tail grip safety*/**
$35
Install standard 1911 thumb safety*/**
$50
Install ambidextrous 1911 thumb safety (if grip does not require modification)*/**
$55
Install ambidextrous 1911 thumb safety, includes grip modification*/**
$85
Install Browning extended ambidextrous thumb safety*/**
$65
Trigger Tuning/refinishing at same time (coating completed at same time discount by 30%)
$65.
1911 style trigger job
$115
SIG Sauer trigger job (includes spring kit)
$125
Browning Hi-Power trigger job, w/magazine disconnect removed .
$125
Glock, smooth trigger action only (does not change release weight)
$45
Glock target trigger, smooth trigger action, install 3.5 pound connector (not for carry)
$65
Springfield XD, smooth trigger action only - (DOES NOT change take-up, over travel or release weight).
$45
Springfield XD target trigger, smooth action, reduce take-up & over travel, reduce release weight (includes parts kit)
$255
Springfield XD target trigger (customer supplied parts)
$85
Test fire (ammo additional)
$25
   
Hammers & Triggers (Parts & Finishing Not Included)  
Install 1911 style match trigger (trigger job not included).
$25
Bob hammer (remove hammer spur, semi-auto pistols) Disassemble reassemble additional 
$35
Install match sear (trigger job not included,)* 
$25
Install hammer (drop-in, trigger job not included)*
$25
Barrels, Bushings, Guide Rods (Parts & finishing Not Included) Thread barrel for suppressor (surcharge applies for metric threads & non-standard configurations).
$125
Thread barrel for suppressor, includes thread protector cap
$150
Cut barrel, face and cut crown
$65
Re-crown barrel
$45
Throat barrel and polish chamber/feed ramp..
$40
Install/fit & chamber match grade barrel and match bushing (1911)*
$140
Install & chamber match grade barrel (1911 bull barrel, Glock, XD, Browning)
$85
Install drop-in barrel (minor fitting required, bushing fitting not included)
$35
Install solid match barrel bushing.
$60
Install Briley spherical bushing
$60
Install drop-in barrel bushing (minor fitting required)Refinishing maybe required to slide/bushing
$25
   
Pistol Frames (Parts & finishing Not Included):  
Bobtail 1911 conversion *
$100
Bevel magazine well*
$55
Install & blend Smith & Alexander 1911 mag well*
$75
Install ejector*
$25
Install magazine catch*
$20
Install slide stop*
$20
Stake plunger tube*
$20
Stake grip bushings*
$25
Install grip bushings (standard, slim or oversize) Threading additional for oversize plus bushings
$45
Install light rail to 1911 style frame (silver solder) Drill 3 holes 40 ea=120*/**
$65
Install mainspring housing (if fitting required).
$30
   
Pistol Slides (Parts & Metal Finishing Not Included)  
Add front serrations (match rear serrations)
$120
Lower and flair ejection port***
$55
Tune extractor***
$30
Polish breech face
$25
Fit new slide to frame (does not include barrel fitting)***
$75
   
Revolver Specific Work (Metal Finishing Not Included)  
Smooth action, tune trigger, tune hammer/sear engagement (single action or double action revolver, includes spring kit)
$125
Smooth trigger operation only***
$75
Radius cylinder charge holes (for speed loader).
$55
Polish chambers (for improved extraction)***
$45
Re-crown barrel**
$45
Cut barrel, face and cut crown (sight installation not included).
$75
Bob hammer & polish (double action only conversion)
$95
Round, radius & polish trigger shoe
$75
Correct timing (S&W only), includes supply & fitting new hand.
$115
Remove end shake & excessive head space***
$85

 

 

 

 

Rifle Gunsmith Services

 
Function check / safety inspection (test fire not included, ammo additional)
$25
Function check / safety inspection - machine gun (test fire not included).
$65
Test fire (ammo not included)
$25
Ultra Clean (complete detail strip, ultrasonic clean, ultrasonic lube, parts inspection and reassemble)
$40
Ultra Clean - Machine guns, ‘heavily accessorized’ AR15 rifles, .50BMG rifles
$65
   
Barrel Services (Test Fire Required, Finishing Not Included)  
Cut & crown barrel (must have Form 4 if SBR or SBS)
$80
Thread barrel for muzzle brake or suppressor, includes cut & crown if required (surcharge for metric & special threads)
$125
Fit new barrel to AR15 rifle
$65
Fit new gas block to AR15 barrel (taper pin mount).
$45
Permanently fix flash hider (drill & pin)
$40
Remove permanently fixed flash hider
$55
   
Bolt Services (Parts & Finishing not included)  
Install Sako or M16 extractor in Remington 700 bolt
$190
Install tactical bolt knob (Remington 700 or Winchester Model 70)
$115
Check head space
$25
Rebuild AR15 bolt *
$45
Fit AR15 gas key
$35
   
HK Specific Services (Finishing Not Included)  
Thread barrel for muzzle brake or suppressor, includes re-crown if required.
$125
Install tri-lug or other suppressor adapter (adapter not included)
$135
Fit new barrel to H&K rifle or machine gun
$185
Install paddle-type magazine release on HK94 or MP5
$225
Refinish HK94 or MP5 in original HK-style black DuraCoat
$275
   
Trigger Tuning  
Trigger job, most rifles, includes test fire
$125
Install aftermarket trigger & adjust (trigger not included)*
$35
Test fire for function (ammo additional)
$25
Trigger guard/Magazine (Remington 700, Finishing not included)  
Install Custom Trigger Guard/Bottom Metal (fiberglass stock, subject to suitability of stock)
$165
Install Drop-In Trigger Guard/Bottom Metal (some fitting required)*/**
.$55
   
Stock Fitting (Finishing not included)  
Complete glass bedding with aluminum pillars, free float barrel channel (most fiberglass stocks).
$120
Apply non-slip texture to pistol grip and for end (stock will require finishing)
$255
Install recoil pad (synthetic stock)
$75
Install recoil pad (wood stock) Special pads additional
$95
Install accessory rail in for end (fiberglass stocks)
$65
Install sling swivel studs
$25
Install AR15 stock or hand guard
$25
Install AR15 hand guard (if gas block has to be removed)*/**
$55
   
Sights (Finishing Not Included):  
Drill & tap receiver for sight bases, 6-48 or 8-40 (4 holes)*/**
$65
Drill & tap hole, each (hardened & plated steel charged extra)*/**
$25
Mount & bore sight scope (scope, rings, bases not included - laser sighted, not actual live fire)
$35
Install picatinny scope rail (existing holes - drilling & tapping not required)
$25
   
Shotgun Gunsmith Services  
Function check / safety inspection (test fire not included)
$25
Test fire (ammo not included)
$25
Ultra Clean tactical shotgun (complete detail strip, ultrasonic clean, ultrasonic lube, parts inspection and reassemble)
$45
Ultra Clean - Double Barrel Over/Under and Side-By-Side shotguns
$75
   
Sight Installation (Parts & Finishing Not Included)  
Install Tactical Front sight, plain barrel (silver solder, refinishing of barrel required)
$125
Install Ghost Ring Rear sight
$85
Drill & tap receiver for sight bases, 6-48 or 8-40 (4 holes)
$65
Drill & tap hole, each (hardened & plated steel charged extra)
$20
Install Picatinny scope rail (existing holes - drilling & tapping not required).
$35
   
Barrel Work (Finishing Not Included)  
Cut & crown barrel (finishing not included)
$45
Hone & polish chamber
$25
Hone & polish bore.
$25
Cut barrel thread for browning invector chokes
$125
   
Action Work (Parts & Finishing Not Included)  
Smooth action
$75
Trigger tuning (smooth only)
$65
Install Remington 870 large safety button
$15
Convert safety button to Left Hand operation
$65
   
Stock Work (Parts & Finishing Not Included)  
Install Pachmayr decelerator recoil pad (synthetic stock).
$75
Shorten length of pull (cut down butt stock, may require new recoil pad)
.$95
Apply non-slip texture to pistol grip and for end (stock will require finishing)
$120
Round off recoil pad.
$25
Install replacement for end
$25
Install replacement stock & for end
.$45
Install sling mounts
$30
Install side saddle (may require new for end)
$25
   
 *Parts not included/**Refinishing required not included/***Disassemble/reassemble required/Prices subject to change.  
   

 

 

Customer Testimonials

Copyright © 2020 Cerakote Gun Coatings, Gun Re-Finishing, DuraCoat Robar NP3 Phoenix AZ. All Rights Reserved.